How to Use the dancemoon JustHang Shower Squeegee

The JustHang Shower Squeegee is designed for effortless cleaning after your shower. With its sleek, ergonomic design and no-installation setup, it's ready to use whenever you are. In just a few easy steps, you can remove water spots and streaks from glass, tiles, or mirrors.

Step-by-Step Instructions:

Grab and Position

After your shower, take the JustHang from where it's hanging—on the shower door, towel bar, or wall. Place the silicone blade flat against the glass and gently tilt the handle upward at a slight 10° angle.

Wipe Down Smoothly

Starting from the top, slide the squeegee downward with light pressure. Let gravity help you. Move from top to bottom, and side to side, overlapping each stroke slightly to avoid streaks or missed spots.

Cover Large Areas Your Way

When cleaning larger surfaces like mirrors or tiled walls, feel free to use the direction and motion that suits you best—whether that’s side-to-side, top-down, or center-outward. Whatever feels easiest will work.

Rinse and Rehang

Once you're done, rinse the blade with clean water to remove any soap or residue. Then simply hang the JustHang back on your shower door, towel bar, or wall edge—no extra storage needed.

Quick Tips for Best Results:

1. Use the squeegee right after your shower, while the surface is still wet. It’s easier to clean before water dries and leaves marks or buildup.
2. The soft silicone blade works well with gentle, steady pressure — there’s no need to press too hard. Let the tool do the work.
3. If the blade is dripping, give it a quick shake or wipe it with a towel before you begin. It helps you get a cleaner swipe.
4. Rinse off soap residue or scale build-up from the blade with water. This helps maintain the performance and cleanliness of the squeegee over time.